new1234.jpg

Archive

Posts Tagged ‘Hyper-V’

VMware: My favorite Windows 2012R2 template configuration

December 16th, 2014 9 comments

image

 

Virtual Hardware (VMX) Template configuration

Hardware Value
Memory 2 GB
CPU’s Number of virtual sockets: 1
Number of cores per socket: 2
Video card Number of video displays: 1
Total video memory: 5 MB (1280×1024)
VMCI device None
SCSI Controller 0
Hard disk 1
LSI Logic SAS, bus sharing: none
40 GB, Thick Provision Eager Zeroed (<—best performance)
CD/DVD Drive 1 Client Device
Floppy Drive 1 Removed
Network Adapter 1 VMXNET3, network: VM Network with DHCP (for joining domain)
General Options OS: Microsoft Windows Server 2012 R2 (64-bit)
VMware Tools Advanced: Check and upgrade Tools during power cycling
Virtual Machine Version 8 (not 9 because you only can edit version 9 via vSphere web-client)
Advanced > General Enable logging

 

Virtual Machine BIOS configuration

image

Configuration Value
Boot-time Diagnostics Screen Enabled

Read more…

sanderdaems

Sander Daems is founder and author of this blog and working as a Lead (Sr.) Consultant by UNICA ICT Solutions. Sander has over 15 years experience in IT, primary focus: virtualization and modern worksplace.

More Posts - Website

Follow Me:
TwitterLinkedIn

Hyper-V: Microsoft Virtual Machine Converter 3.0 released

October 14th, 2014 No comments

Microsoft® Virtual Machine Converter (MVMC) is a Microsoft-supported, stand-alone solution for the information technology (IT) pro or solution provider who wants to convert virtual machines and disks from VMware hosts to Hyper-V® hosts and Windows Azure™ or alternatively convert a physical computer running Windows Server 2008 or above server operating systems or Windows Vista or above client operating systems to a virtual machine running on Hyper-V host

MVMC can be deployed with minimal dependencies. Because MVMC provides native support for Windows PowerShell®, it enables scripting and integration with data center automation workflows such as those authored and run within Microsoft System Center Orchestrator 2012 R2. It can also be invoked through the Windows PowerShell® command-line interface. The solution is simple to download, install, and use. In addition to the Windows PowerShell capability, MVMC provides a wizard-driven GUI to facilitate virtual machine conversion.

New Features in MVMC 3.0
The 3.0 release of MVMC adds the ability to convert a physical computer running Windows Server 2008 or above server operating systems or Windows Vista or above client operating systems to a virtual machine running on Hyper-V host.

Standard Features

  • Converts virtual disks that are attached to a VMware virtual machine to virtual hard disks (VHDs) that can be uploaded to Microsoft Azure.
  • Provides native Windows PowerShell capability that enables scripting and integration into IT automation workflows.
    Note The command-line interface (CLI) in MVMC 1.0 has been replaced by Windows PowerShell in MVMC 2.0.
  • Supports conversion and provisioning of Linux-based guest operating systems from VMware hosts to Hyper-V hosts.
  • Supports conversion of offline virtual machines.
  • Supports the new virtual hard disk format (VHDX) when converting and provisioning in Hyper-V in Windows Server® 2012 R2 and Windows Server 2012.
  • Supports conversion of virtual machines from VMware vSphere 5.5, VMware vSphere 5.1, and VMware vSphere 4.1 hosts Hyper-V virtual machines.
  • Supports Windows Server® 2012 R2, Windows Server® 2012, and Windows® 8 as guest operating systems that you can select for conversion.
  • Converts and deploys virtual machines from VMware hosts to Hyper-V hosts on any of the following operating systems:
  • Windows Server® 2012 R2
  • Windows Server® 2012
  • Windows Server 2008 R2 SP1
  • Converts VMware virtual machines, virtual disks, and configurations for memory, virtual processor, and other virtual computing resources from the source to Hyper-V.
  • Adds virtual network interface cards (NICs) to the converted virtual machine on Hyper-V.
  • Supports conversion of virtual machines from VMware vSphere 5.5, VMware vSphere 5.0, and VMware vSphere 4.1 hosts to Hyper-V.
  • Has a wizard-driven GUI, which simplifies performing virtual machine conversions.
  • Uninstalls VMware Tools before online conversion (online only) to provide a clean way to migrate VMware-based virtual machines to Hyper-V.
    Important MVMC takes a snapshot of the virtual machine that you are converting before you uninstall VMware Tools, and then shuts down the source machine to preserve state during conversion. The virtual machine is restored to its previous state after the source disks that are attached to the virtual machine are successfully copied to the machine where the conversion process is run. At that point, the source machine in VMware can be turned on, if required.
    Important MVMC does not uninstall VMware Tools in an offline conversion. Instead, it disables VMware services, drivers, and programs only for Windows Server guest operating systems. For file conversions with Linux guest operating systems, VMware Tools are not disabled or uninstalled. We highly recommend that you manually uninstall VMware Tools when you convert an offline virtual machine.
  • Supports Windows Server and Linux guest operating system conversion. For more details, see the section “Supported Configurations for Virtual Machine Conversion” in this guide.
  • Includes Windows PowerShell capability for offline conversions of VMware-based virtual hard disks (VMDK) to a Hyper-V–based virtual hard disk file format (.vhd file).
    Note The offline disk conversion does not include driver fixes.

Source: Microsoft

sanderdaems

Sander Daems is founder and author of this blog and working as a Lead (Sr.) Consultant by UNICA ICT Solutions. Sander has over 15 years experience in IT, primary focus: virtualization and modern worksplace.

More Posts - Website

Follow Me:
TwitterLinkedIn

VMware: Nesting Hyper-V 2012 R2 on vSphere ESXi 5.5

August 28th, 2014 3 comments

In my test environment I configured tree Hyper-V 2012R2 servers nested on vSphere 5.5,  the configuration was very easy, here some details:

1. Deploy a Windows 2012R2 server, use GuestOS Windows 2012 (64-bit)

2. Upgrade hardware level to version 10

3. Remove the virtual machine from the vCenter inventory

4. Download and edit the .vmx file, add the following lines:

vhv.enable = “TRUE”
hypervisor.cpuid.v0 = “FALSE”
mce.enable = “TRUE”

 image

5. Upload and re-add the .vmx file to the vCenter inventory

6. Edit the virtual machine hardware > CPU > Hardware virtualization> select: Expose hardware assisted virtualization to the guest OS

*Note: you need to upgrade to HW level 10, otherwise the hardware virtualization tab is grayed out.

 image

7. Power on the virtual machine

8. Now you are able to select the Hyper-V role, finish the setup

image

 

Ejoy!

sanderdaems

Sander Daems is founder and author of this blog and working as a Lead (Sr.) Consultant by UNICA ICT Solutions. Sander has over 15 years experience in IT, primary focus: virtualization and modern worksplace.

More Posts - Website

Follow Me:
TwitterLinkedIn